Dr. Arman Sedghi

1998- Present:  Imam Khomeini International University (IKIU),

• Associate Professor

2014-2016: Niroo research Institute

• Chief Advisor on fabrication of solar cells

1999-2007:  Islamic republic of Iran Railway Company (freight & passenger wagons divisions)

• Chief Advanced materials advisor

2001-2005: Advanced materials and industrial development company (AMIDCO)

• Chief Advanced materials advisor

1998-2016: Islamic Azad University- Saveh Branch

• Lecturer of courses and perform joint researches

1991-2015:  Iran University of science and technology

• Lecturer of courses and perform joint researches

1990-1995: Tehran University

• Lecturer of courses and perform joint researches

1986-1987: Mavadkaran Company

• Head of quality control department

 

 

2013-2018: Improve properties of BSCCO superconductor materials for application in superconductor wires

Niroo Research Institute (NRI), Imam Khomeini International University (IKIU)

2010-2018: Fabrication of different Titanium based MAX phase materials and composites (Ti2AlC, Ti3AlC2, Ti3SiC2, and C-C-SiC Ti3SiC2 composites)

Imam Khomeini International University (IKIU)

2017-present: Fabrication of hybrid supercapacitor cells (Graphene/Polypyrrole, Graphene/ Polypyrrole /MnOx, Graphene/Polypyrrole/NiO, Graphene/ Polypyrrole/ Co3O4, Graphene/ Polypyrrole/Metal-organic frameworks (MOF)) with inorganic and organic electrolytes for electrical energy storage

Niroo Research Institute (NRI), Imam Khomeini International University (IKIU)

2018-present: Synthesis and characterization of Ni, Cu based Metal Organic framework (MOF) for using as hybrid electrodes in supercapacitors

Imam Khomeini International University (IKIU)

2017-present: Applying nano silica-based superhydrophobic coatings on ceramic electrical insulators and investigation of their effects on the properties of these insulators

Niroo Research Institute (NRI), Imam Khomeini International University (IKIU)

2017-present: Synthesis of bioactive glasses with different additives and fabrication of composite scaffolds with these materials and biodegradable polymer matrices

Imam Khomeini International University (IKIU)

2017-Present: Investigation on replacement of gas turbine hot section parts with ceramic matrix composite (SiC/SiC and Al2O3/Al2O3 composites)

MAPNA Company 

2012-2018: Synthesis Of Celsian by commercial native raw materials and fabrication and characterization of Celsian bodies by gel cast method

Imam Khomeini International University (IKIU)

2016-2018: Fabrication and characterization of Goethite/ graphene composite for adsorption of arsenic from drinking water

Payamavaran Nanofanavari Fardanegar (PNF) Company, Imam Khomeini International University (IKIU)

2009-2016: the comprehensive study on the fabrication of oxide ceramic nanopowders and nanostructured bodies (Mullite, cordierite, Mgal2O4, TiO2, soft and hard ferrites, PZT)  by using a gel combustion method 

Imam Khomeini International University (IKIU), Islamic Azad university-Saveh branch

2014- 2015: Fabrication of C-SiC composites by PIP method

Iran University of Science and Technology (IUST)

2010-2012: Fabrication of ZnO nanostructured varistors by sol-gel method

Islamic Azad University-Saveh Branch

2005-2007: Director of Design and Construction of glass foam plant

Bastab Bana company

1991-2011: Fabrication of carbon fibers from commercial and modified PAN fiber precursors   

Imam Khomeini International University (IKIU) Iran, the Industrial Development & Renovation Organization of Iran (IDRO), K. N. Toosi University of Technology

2007-2008: Fabrication of low-cost carbon fibers from coal tar pitch precursors

Iran University of science and technology (IUST)

2006-2008: Optimization of Titanium Diboride (TiB2) particles fabrication by the carbothermal method

Iran University of Science of Technology (IUST)

1999-2005: Fabrication and characterization of KK-type and LL-type composite brake shoes

Islamic Republic of Iran Railway Company, Telda Company, Iran Lent Company

2001: Fabrication and characterization of Pt-Al coatings on Ni-base superalloy substrates by PVD method

 Islamic Azad University-Science and research branch

1998-2000: Fabrication of MoSi2-Al2O3-Aluminum composite powders and by S.H.S. method and study its properties

 Imam Khomeini International University (IKIU)

1999:   Fabrication of SiC/Al2O3 composites by DIMOX (Lanxide) method and characterize it. 

Imam Khomeini International University (IKIU)

1998-1999: Characterization of carbon-based super-capacitors (EDLC)

SAPTA Company

1988-1997: Fabrication & characterization of carbon-carbon composites

Iran University of science & technology (IUST)

1993-1996: Fabrication & characterization of D.S.C. anodes (RUO2-TiO2-SnO2 coated Titanium plates)

Iran University of science &technology (IUST), Deputy for Research and Human Resources-energy ministry, Tehran University (TU)

1988-1993: Fabrication and characterization of SiC (w) from rice husk

Tehran University (TU)

1988-1990: Fabrication & characterization of carbon fiber-Aluminum matrix composites

Tehran University (TU)

1984-1985: Separation Of heavy metals from wastewaters by active transport through the liquid membrane via Electrodialysis

Tehran University (TU)

 

 

(Ph.D.)

2013-present: Design of engineering materials

2013-present: Advanced composite materials

 

(M.Sc.)

2015-Present: Engineering oxide ceramics

2008-present: Advanced methods for characterization of materials

2007-Present: Advanced properties of materials

1996-2003: Engineering Non-oxide ceramics

2003-2016: Dislocation Theory

2008-2012: Research methods

2009-2012: Advanced polymers

2008-present: Theory and technology of semiconductor materials

 

(B.Sc.)

2000-Present: New methods for materials characterization

1990- present: Kinetics in materials engineering

2002-2010: metal forming (1)

2000-2009: metal forming (2)

2002-2012: Extractive metallurgy (2) – Non-Ferrous metals

1999-Present: Thermal properties of ceramics

1999-Present: Thermal properties of ceramics

1999- 2001: Refractory Materials

1998-2018: Electrical & optical properties of materials

1998-2016: Advanced materials

1998-2001: Engineering ceramics

2003-2005: Structure of Ceramics

2000-2008: Mechanical properties of materials-1

1993-1994: Theory of Diffusion

 

 

(Ph.D.)

Fallah H., “Effect of nano-additives on the structure and properties of the Bi-based superconductor composites”, Imam Khomeini International University, 2018

Yaghobizadeh Venini O., “Fabrication and characterization C_f-C-SiC-Ti₃SiC₂-ZrC composites”, Imam Khomeini International University, 2018

Nourmohammadi Miankushki H., Investigation the effect of metal oxides and conducting polymers on supercapacitor properties of graphene electrodes, Imam Khomeini International University, 2018

Ghahraman Afshar M., “Application of raw and amine functionalized carbon on the solid extraction and electrochemical sensor fabrication for extraction and detection of Methadone, Tramadol, Copper, Iron, mercury and aluminum”, Imam Khomeini International University, 2013

Eslami Farsani R., “Fabrication and optimization of carbon fibers from commercial PAN fibers” K. N. Toosi University of Technology, 2005

(M.Sc.)

Rahmani S., “Effect of processing parrameters on Fabrication and properties of Ti₂AlC MAX Phase bodies by Pressureless sintering”, Imam Khomeini International University, 2018

Kabiri F., “Effect of acrylate gel maker parameters on mechanical properties of Celsian bodies fabricated by gel casting method”, Imam Khomeini International University, 2018

Rezaei S., “Goethite nanoparticles synthesis and the effect of raw materials and manufacturing parameters on its structure and properties”, Imam Khomeini International University, 2018

Rahimi A., “Fabrication of Fe-Cr-Al alloy nanopowder and investigation of its properties”. Imam Khomeini International University, 2018

Vahdati N., “Fabrication of zinc – manganese ferrite nanopowders by gel combustion method and investigation the effect of Ni and Co additives on its structure and magnetic properties”, Islamic Azad University-Saveh Branch, 2017

Haghighi M., “Effect of nano Graphene reinforcement on mechanical properties and microstructure of Titanium matrix nanocomposites”, Imam Khomeini International University, 2017

Mehdikhani A., “Investigating the layers structure and production parameters on photovoltaic properties of Nano-Structure Perovskite solar cell”, Imam Khomeini International University, 2017

Yazdanshenas A., “Synthesis and electrochemical investigation of polypyrrole/ unzipped carbon nanotube composites as the electrode material in supercapacitors”, Imam Khomeini International University, 2017

Ghafari Gh., “Fabrication of Al60601 T6-Graphene nanocomposite by Friction stir processing (FSP) method and investigate its structure and properties”, Islamic Azad University-Saveh Branch, 2017

Shayegan Moghadam S., “Effect of alloying elements on high-temperature electrical properties of Cu-graphene nanocomposites fabricated by SPS method”, Islamic Azad University-Saveh Branch, 2017

Izadfar K., “Effect of raw materials on structure and properties of nano mullite bodies fabricated by gel combustion method”, Imam Khomeini International University, 201

Shahrdami L., “ Study on the effect of carbon nanotube and silicon carbide whisker reinforcements on the mechanical properties of aluminum matrix nanocomposites fabricated by hot pressing”, Imam Khomeini International University, 2016

Alipour M., “Fabrication of Strontium Hexaferrite Nanoparticles via Gel Combustion Method and the Effect of Different Ions Substitution on it’s the Structural, Microstructural and Magnetic Properties”, Imam Khomeini International University, 2016

Hedayati Kouche S., “structure and properties of magnetic nano-ferrites made via gel combustion method”, Imam Khomeini International University, 2016

Poorbakhshibi Digesaraiee M., “Fabrication of Al/Al₂O₃/SiC composite by direct oxidation of aluminum (DIOMX) and assessing of its microstructure and properties”, Imam Khomeini International University, 2015

Shakeri E., “Fabrication of Molybdenum disilicide/ carbon nanotube (Mosi₂/CNT) composite and study their microstructure and mechanical properties”, Imam Khomeini International University, 2015

Dadashian S., “Synthesis of monoclinic celsian by solid-state reaction and investigate its properties”, Imam Khomeini International University, 2015

Rabiee A.A., “Investigation on recycling of waste graphite electrodes”, Islamic Azad University-Saveh Branch, 2015

Bahrami N., “Synthesis of PZT nanopowder by the gel-combustion method and characterize of its morphological and physical properties”, Islamic Azad University-Saveh Branch, 2014

Ghiasi S.B., “Fabrication of Nanosilver by EEW method and study its structure and antibacterial properties”, Islamic Azad University-Saveh Branch,, 2014

Rahmani A., “Fabrication of cordierite nanopowders by gel combustion method and study their purity,morphology and structure”, Imam Khomeini International University, 2014

Vahed R., “Fabrication of aluminum matrix composites reinforced by MAX phases and characterize their properties”, Imam Khomeini International University, 2013

Amini E., “Synthesis of barium hexaferrite nanopowder by sol-gel combustion method and investigate the effect of raw materials and fabrication parameters on its properties”, Imam Khomeini International University, 2013

Sajadi A., “Fabrication of Nano-cordierite by chemical method and study of fabricated bodies properties”, Imam Khomeini International University, 2013

Haydari J., “Thermomechanical properties of W/ZrC nanocomposites in unsteady state thermal heating”, Islamic Azad University-Saveh Branch, 2013

Najarzadeh Banadaki A., “Fabrication of thermal barrier FGM nanostructured YSZ/Al2O3 coatings and investigate their physical properties”. Imam Khomeini International University, 2013

Moradi Z., “Fabrication and characterization of MgAl₂O₄ spinel bodies”, Imam Khomeini International University, 2013

Mirshahvellayati H., “Fabrication of thermal barrier FGM nanostructured YSZ/Al2O3 coatings and study their working behavior”, Imam Khomeini International University, 2013

Amereh A., “Fabrication of Nano TiO2 coating on ceramic tiles and study its photocatalytic properties”, Islamic Azad University-Saveh Branch, 2013

Ghorbani K., “Study of Boron, Zirconium and Titanium on tensile and hot tearing properties of 206 cast Aluminum alloy”, Islamic Azad University-Saveh Branch, 2013

Baghdadi A., “investigation of different nucleating agents in initial ceramic shell slurry on mechanical properties of Ni-based superalloy”, Islamic Azad University-Saveh Branch, 2013

Mosavizadeh P., “Synthesis of Lithium Nickel vanadate (LiNiVO₄)by gel combustion method”, Islamic Azad University-Saveh Branch, 2012

Abhari A.Sh., “Fabrication of Silicon carbide- boron carbide nanocomposites by powder metallurgy method and study their structure, fracture behavior and effect of residual stress on their mechanical Properties and fracture toughness”, Islamic Azad University-Saveh Branch, 2012

kholghi A.,“Fabrication & characterization of polymer matrix composites, reinforced by commercial PAN-based carbon fibers”, Islamic Azad University-Saveh Branch, 2012

Moghimi Ahouie F. M., “Effect of Li and Zn on tensile and wear properties of extruded Al-15% Mg₂Si composite”, Islamic Azad University-Saveh Branch, 2012

Javedaneh F., “Effect of nano-clay and carbon nanotube on the physical and mechanical properties of glass fiber- epoxy hybrid composites”, Islamic Azad University-Saveh Branch, 2012

Gholami M., “Synthesis of carbide compound based on Titanium an Tin and study their formation and their physical and chemical properties”, Islamic Azad University-Saveh Branch, 2012

Cheraghi E., “Synthesis and optimization of nano-silver particles from waste photographic films by solid-liquid extraction using leaching method”, Islamic Azad University-Saveh Branch, 2012

Alimohamadi M., “Fabrication of Aluminum-cobalt-zinc ceramic pigments and investigate their properties”, Islamic Azad University-Saveh Branch, 2012

Nemat S., “Synthesis of Titanium diboride nanopowder by magnesiothermic reduction method”, Imam Khomeini International University, 2012

Poostian S., “Fabrication of MgAl₂O₄ spinel nanopowder and characterize their morphology and structures”, Islamic Azad University-Saveh Branch, 2012

Shahbazkhan A., “Fabrication of Hydroxyapatite by gel combustion method and study its properties”, Islamic Azad University-Saveh Branch, 2012

Nourmohammadi Miankoshki H., “Fabrication of Dye-sensitized solar cell and study the effect of additives (carbon nanotubes) on their properties”, Imam Khomeini International University, 2011

Dejdar F., “Study and recycle of Tungsten powder from waste Tungsten carbide by alkaline fusion method”, Islamic Azad University, Tehran Dental Branch, 2011

Eshraghi I., “The effect of fabrication parameters on properties of seam-welded Aluminum alloy sheets”, Islamic Azad University-Saveh Branch, 2011

Farhadi Nia F., “Fabrication of Aluminum matrix composites with boride reinforcements and study their properties”, Imam Khomeini International University, 2011

Hajizadeh V., “Effect cobalt replacement with Cupper alloys in diamond powder – metal matrix composites on microstructure and mechanical properties at fabricated samples”, Islamic Azad University-Saveh Branch, 2011

Torabi Parizi M., “Optimization of Alumina content in Al/Al₂O₃ Nano-Composites by the compocast regarding to Microstructure and Mechanical Properties”, Islamic Azad University-Saveh Branch, 2011

Ahmadi M., “In-situ synthesis of MoSi₂-SiC composites by mechanical alloying”, Islamic Azad University-Saveh Branch, 2011

Barkhordari, M., “Synthesis of Titanium Oxide Nano Powder by Gel Combustion Method and Optimizing of its fabrication parameters by Taguchi method”, Imam Khomeini International University, 2011

Biglari S., “Fabrication of Nano-Silica From Rice Husk From Chemical and Milling Method and Characterize Polymer Nanocomposite Properties Made From It”, Imam Khomeini International University, 2011

Aryapour A., “Synthesis of boron carbide by sol-gel method in alcoholic solution and organic precursors and study its properties”, Islamic Azad University-Saveh Branch, 2010

Khazaiee M.T., ., “The effect of nano TiO₂ and carbon nanotubes on the structure and mechanical properties of epoxy-based hybrid nano-composites” Islamic Azad University-Saveh Branch, 2010

Maroofi N., “Effect of Nano clay and styrene polymer additives on Stripping of hot Asphalt-Mixture compounds”, Imam Khomeini International University, 2010

Blookat M. J., “Effect of Nano clay and styrene polymer additives on tensile strength and humidity sensitivity of Asphalt-Mixture compounds”, Imam Khomeini International University, 2010

Hassanpoor Poorsharmini M., “Effect of Boron additive on wear properties of Ni₃Al intermetallic compound’, Islamic Azad University-Saveh Branch, 2010

Rezanejad F., “Effect of surface treatment of commercial polyacrylonitrile (PAN) fibers on fabrication and properties of carbon fibers made from them”, Imam Khomeini International University, 2010

Zarei J., “Simultaneous effect of Temperature and pressure on mechanical properties of Al/TiB2 composites fabricated by the semi-solid method”, Islamic Azad University-Saveh Branch, 2010

Didevar N., “study of effective parameters on Charpy notch impact energy absorption of Aluminum/Epoxy composites”, Islamic Azad University-Saveh Branch, 2010

Hamidnejad N.,“Effect of Al₂O₃ content on mechanical and electrical properties of Aluminosilicate electrical porcelains”, Islamic Azad University-Saveh Branch, 2009

Khoshakhlagh M.,“Effect of TiC nucleating agent on physical and mechanical properties of cold rolled AA8006 and AA8011 aluminum alloys”, Islamic Azad University-Saveh Branch, 2009

Mahjobi A., “Fast methods for fabrication of activated carbons and characterize their properties”, Islamic Azad University-Saveh Branch, 2009

Langari M., “study of Magnesium nanocomposites fabricated by mechanical milling as hydrogen storage”, Islamic Azad University-Saveh Branch, 2009

Mansori S. M., “Effect of welding heat input on heat affected zone, microstructure and mechanical properties of Submerged arc welded HSLA steel pipes”, Islamic Azad University-Saveh Branch, 2009

Mohseni M., “Study on the application of coal mine waste as the building raw materials”, Imam Khomeini International University, 2009

Vahedi A., “Fabrication and characterization of heat and corrosion resistance steels for using in Aluminum melting furnace burners”, Islamic Azad University-Saveh Branch, 2008

Asgari J., “optimization of cast iron junctions of aluminum electrolysis anodes”, Islamic Azad University-Saveh Branch, 2008

Razazi Borojeni M. “Study and detection of defects in shielded metal arc welded steels by X-Ray Radiography”, Islamic Azad University-Saveh Branch, 2006

Eslami A., “Improve carbon fibers properties and characterize them”, Islamic Azad University-Science and Research Branch, 1999

Nejdat M., “Fabrication of SiC coating on carbon-carbon composites and characterize it”, Iran University of Science and Technology, 1996

 

DMD (Doctor of Medicine in Dentistry)

 Azizi S., “Influence of rebonding on the surface roughness of a resin composite (combination of SEM and profilometer study)”, Islamic Azad University, Tehran Dental Branch, 2008

 

 

 

Refereed journal papers:

Yaghobizadeh O., Sedghi A., Baharvandi HR., “Effect of Ti₃SiC₂ on the ablation behavior and mechanism of C_f-C-SiC-Ti₃SiC₂ composites under oxyacetylene torch at 3000 °C”, Pub Date : 25.9.2018, https://doi.org/10.1016/j.ceramint.2018.09.244

Noumohammadi Miankushki  H., Sedghi A., Baghshahi S., “Comparison of copper compounds on copper foil as current collector for fabrication of graphene/ polypyrrole electrode”, Journal of energy storage, 19, 201-212, 2018

Moghanian A., Firoozi S.,  Tahriri M., Sedghi A., A comparative study on the in vitro formation of hydroxyapatite, cytotoxicity and antibacterial activity of 58S bioactive glass substituted by Li and Sr , Materials Science and Engineering: C 91, 349-360, 2018

Yaghobizadeh O., Sedghi A., Baharvandi HR., Effects of ZrC content on the synthesis of MAX phase and mechanical properties of Cf-C-SiC-Ti₃SiC₂-ZrC composites, Ceramics International ,44, (15), 18039-18047, 2018

Yaghobizadeh O., Sedghi A., Baharvandi HR., Mechanical properties and microstructure of the C-C-SiC, C-C-SiC-Ti₃SiC₂ and C-C-SiC-Ti₃Si(Al)C₂ composites”,  Materials Science and Engineering: A , 731, 446-453, 2018

Fallah-Arani, H., Baghshahi, S., Sedghi, A., Stornaiuolo D., Tafuri F., Riahi-Noori N., Enhancement in superconducting properties of Bi₂Sr₂Ca₁Cu₂O₈+ θ (Bi-2212) by means of boron oxide additive, Physica C: Superconductivity and its Applications, 548, 31-39, 2018

Fallah-Arani, H., Baghshahi, S., Sedghi, A., Stornaiuolo D., Tafuri F., Riahi-Noori N., The influence of heat treatment on the microstructure, flux pinning and magnetic properties of bulk BSCCO samples prepared by sol-gel route, Ceramics International 44 (5), 5209-5218, 2018

Nourmohammadi Miankushki H., Sedghi A., Baghshahi S., A comparison of the Electrochemical Properties of graphene/Mn₃O₄ Composites fabricated by two Different Methods, International journal of electrochemical science 13, (3), 2462-2473, 2018

Yaghobizadeh O., Sedghi A., Baharvandi HR., Investigation of the effect of various parameters on the amount and morphology of nano-laminate MAX phase in Cf-C-SiC-Ti3SiC2 composite, International Journal of Refractory Metals and Hard Materials 71, 292-300, 2018

Moghanian A., Sedghi A., Ghorbanoghli A., and Salari E., The effect of magnesium content on in vitro bioactivity, biological behavior and antibacterial activity of sol–gel derived 58S bioactive glass. Ceramics International 44, (8), 9422-9432, 2018

Nourmohammadi Miankushki H., Sedghi A., Baghshahi S., Facile and scalable fabrication of graphene/polypyrrole/MnOx/Cu(OH)₂ composite for high-performance supercapacitors, J Solid State Electrochem. Pp.1-13, pub date: 13 July 2018, https://doi.org/10.1007/s10008-018-4008-x

Sabbaghizadeh R., Shamsudin R., Zainuddin Z., Hamid MA., Azam F., Kanagesan S., Sedghi A., Crystallization Evolution of (Nd, Pr)-(Fe, Co, Ga, Ti, C)-B Melt-Spun Ribbons with Various Solidification Rates and Compositions, Science of Advanced Materials 9 (6), 978-983, 2017

Sedghi A, Shaeri, M. H., Shahrdami L., Microstructural and mechanical characterization of Al/CNT-SiC_w hybrid nano-composite prepared by hot pressing, Metallurgical engineering, vol.20. No.1, pp.26-36, 2017

Farhadinia F, Sedghi A, Nooghani MT., Properties of an Al/(Al₂O₃+ TiB₂+ ZrB₂) hybrid composite manufactured by powder metallurgy and hot pressing, Journal of Applied Mechanics and Technical Physics 58 (3), 454-460, 2017

Yaghobizadeh O., Sedghi A., Baharvandi HR., Introduction of nano-laminate Ti₃SiC₂ and SiC phases into Cf-C composite by liquid silicon infiltration method, Metallurgical and Materials Engineering 23 (1), 21-30, 2017

Moghanian A., Sharifianjazi F., Abachi P., Sadeghi E., Jafarikhorami H., Sedghi A.,  Production and properties of Cu/TiO₂ nano-composites, Journal of Alloys and Compounds 698, 518-524, 2017

Sabbaghizadeh R., Shamsudin R., Deyhimihaghighi N., Sedghi A., Enhancement of dose response and nuclear magnetic resonance image of PAGAT polymer gel dosimeter by adding silver nanoparticles, PloS one 12 (1), e0168737, 2017

Rahmani A., Sedghi A., The effect of fuel type and calcination temperature on the structure and morphology of fabricated nano-cordierite based on gel-combustion method, Journal of Ceramic Processing Research 17 (10), 1057-1062,2016

Sabbaghizadeh R., Shamsudin R., Deyhimihaghighi N., Sedghi A., DSC analysis of Nd-Fe-B ribbons prepared by melt spinning method with diverse compositions and cooling rates, Digest Journal of nanomaterials and biostructures, Vol.11, No.4, pp.1239-1244. 2016

Sedghi A., Dadashian S., Solid state synthesis of celsian barium aluminosilicate by a multistep firing technique, Advances in Materials and Processing Technologies 1 (3-4), 484-492, 2015

Poorbakhshi MS., Sedghi A., Effect of solvent and processing condition on structure and morphology of aluminum nitride nanopowders fabricated by electrical explosion of wire (EEW), Advances in Materials and Processing Technologies 1 (3-4), 508-514, 2015

Sedghi A., Rahmani A., Moradi Z., A new method for synthesis of cordierite nanopowder, Advances in Materials and Processing Technologies 1 (3-4), 404-410, 2015

Sedghi A., Nourmohammadi Miankushki H., The effect of drying and thickness of TiO₂ electrodes on the photovoltaic performance of dye-sensitized solar cells, International Journal of Electrochemical Science 10, 3354-3362, 2015

Farhadinia F., Sedghi A., Wear behaviour of Al/(Al₂O₃+ ZrB₂+ TiB₂) hybrid composites fabricated by hot pressing, International Journal of Materials Research 106 (2), 160-165, 2015

Sedghi A., Vahed R., Effect of fabrication parameters on synthesis of Ti₂AlC and Ti₃AlC₂ maxphases by MASHS, Iranian Journal of Materials Science & Engineering Vol. 11, Number 4, pp.40-47, 2014

Farhadinia F., Sedghi A., Fabrication of Al₂O₃/ (ZrB₂ + TiB₂) Composite Using MACS and Microwaves, Metallurgical and Materials Transactions A 45 (7), 3125-3129, 2014

Sedghi A.,Nourmohammadi Miankushki H., Effect of multi walled carbon nanotubes as counter electrode on dye sensitized solar cells, International Journal of Electrochemical Science 9 (4), 2029-2037. 2014

Sedghi A., Noori RN., Hamidnezhad N., Salmani MR., Effect of chemical composition and alumina content on structure and properties of ceramic insulators, Bulletin of Materials Science 37 (2), 321-325, 2014

Sedghi A., Alimohammadi M.,chadorbafzadeh M., Structure and properties of CoxZn1− xAl₂O₄ nano-pigments fabricated by gel combustion method, Ceram. Silikáty 58, 145-150, 2014

Sedghi A, Nourmohammadi Miankushki H., Influence of TiCl₄ treatment on structure and performance of dye-sensitized solar cells, Japanese Journal of applied physics 52 (7R), 075002, 2013

Soleimani M., Ghahraman Afshar M., Sedghi A,, “Amino-functionalization of multiwall carbon nanotubes and its use for solid phase extraction of mercury ions from fish sample”, ISRN Nanotechnology, Vol. 2013, Article ID 674289, 8 pages, 2013

Sedghi A., Riahi Noori N., Manufacturing of low cost MoSi₂/Al₂O₃ composites by microwave activated self propagating high temperature Synthesis, Journal of Ceramic Processing Research 14 (1), 41-44, 2013

Sedghi A, Nourmohammadi Miankushki H., Influence of TiO₂ electrode properties on performance of dye-sensitized solar cells, Int J Electrochem Sci 7, 12078-12089, 2012

Sedghi A., Riahi Noori N., Comparison of electrical properties of zinc oxide varistors manufactured from micro and nano ZnO powder, Journal of Ceramic Processing Research. Vol. 12, No. 6, pp. 752~755, 2011

Shahbahrami B., Golestani Fard F., Sedghi A., The effect of processing parameters in the carbothermal synthesis of Titanium Diboride powder, Advanced Powder Technology, 23.pp. 234-238, 2012

Eslami Farsani R., Akhlaghi F., Sedghi A., The Effect of the Pyrolysis Furnace type on the Yield of Silicon Carbide Whiskers Produced from Rice Husks, Defect and Diffusion Forum Vols. 312-315, 346-35, 2011

Sedghi A., Eslami Farsani R.., A Shokuhfar, The effect of commercial polyacrylonitrile fibers characterizations on the produced carbon fibers properties, Journal of Materials Processing Technology 198 (1-3), 60-67, 2008

Eslami Farsani R.., A Shokuhfar, Sedghi A., Conversion of modified commercial polyacrylonitrile fibers to carbon fibers, Journal of optoelectronics and advanced materials 9 (6), p.1614, 2007

Eslami Farsani R.., Raissi RE., Shokuhfar A., Sedghi A., “Optimisation of carbon fibres made from commercial polyacrylonitrile fibres using the screening design method”, Mater. Sci. Poland 25, pp.113-120, 2007

Raissi S., Eslami Farsani R.., Shokuhfar A., Sedghi A., Improving carbon fibers quality characteristic by using statistical modeling, International Journal of Applied Mathematics and Statistics™ 2 (M04), 60-71, 2007

11.Eslami Farsani R., Shokuhfar A., A Sedghi, Stabilization of commercial polyacrylonitrile fibres for fabrication of low-cost medium-strength carbon fibres, e-Polymers 6 (1),1-10, 2006

Shokuhfar A., Sedghi A., Eslami Farsani R., Effect of thermal characteristics of commercial and special polyacrylonitrile fibres on the fabrication of carbon fibres , Materials science and technology 22 (10), 1235-1239, 2006

Eslami Farsani R., Shokuhfar A., Sedghi A., Fabrication of carbon fibres from wet-spun commercial polyacrylonitrile fibres, Fibre Chemistry 38 (5), 383-386, 2006

Eslami Farsani R., Shokuhfar A., Sedghi A., Процесс изготовления углеродных волокон на основе коммерческих полиакрилонитрильных волокон мокрого формования, Химические волокна,5, 31-34, 2006

Sedghi A., Shokuhfar A., Eslami Farsani R., Fabrication of carbon fibers from commercial wet spin polyacrylonitrile fibers, IRANIAN JOURNAL OF MATERIALS SCIENCE AND ENGINEERING 2 (3), 20-25,2005

Eslami Farsani R., Shokuhfar A., Sedghi A., An investigation of the physical and mechanical properties of carbon fibers fabricated from commercial and special polyacrylonitrile fibers” AEROSPACE MECHANICS JOURNAL 1 (2), 87-94,2005

Sedghi A., Parchamy-Araghy H., Ghoranneviss M., The effect of platinum and aluminum deposition by sputtering – ion beam technique on the formation and microstructure of platinum aluminide coating, IUST international journal of engineering science, vol.16,4, pp. 47-51, 2005

Raissi S., Eslami Farsani R., Ali Shokuhfar, Sedghi A., Improving Carbon Fibers Quality Characteristic by Using Statistical Modeling, International Journal of Applied Mathematics & Statistics (IJAMAS), Vol. 2, No. M04, 2004, 60-71

Parchamy-Araghy H., Ghoranneviss M., Sedghi A, shokohi A., Fabrication of Al-Pt coating on Ni-Based superalloys by sputtering – ion beam technique under argon plasma, Journal of Plasma and fusion research series, vol.5, pp. 242-244, 2002

Sedghi A., Golestani-Fard F., The effect of graphitization on the mechanical properties of two dimensional carbon-carbon composites, Material wissenschaft und Wrkstofftechnik 28 (5), 236-240, 1997

Sedghi A., Golestani-Fard F., Evaluation of novalak resins as a precursor for fabrication of carbon-carbon composites, 1. Optimization of curing stages, Material wissenschaft und Werkstofftechnik 28 (9), 451-455, 1997

 

Conference papers:

2018

Zolghadr F., Sedghi A., Baghshahi S., Moghanian A. H. , “Investigation on the vitro formation of hydroxyapatite in 58S bioactive glass substituted by Cu”, 1^st national conference on micro/nano scale technologies, Iran, Tehran, May 2018

2017

Sedghi A., Izadfar K., “Mullite powder synthesis by gel combustion method and study the effect of fuel type on its properties”, 1^st Iran congress on industrial applications of advanced materials and manufacturing, Iran, Tehran, May 2017

Sedghi A., “New aspects in fabrication and characterization of ceramic matrix-carbon fiber composites”, 11^th biennial congress of the Iranian ceramic society & 2^nd international conference on ceramics”, Iran, Tehran, May 2017

Alem A., Sedghi A., “Comparing the reduction quality of graphene oxide with oxalic acid and sodium borohydride”, 11^th biennial congress of the Iranian ceramic society & 2^nd international conference on ceramics”, Iran, Tehran, May 2017

Mehdikhani A., Sedghi A., Tafazoli S., Timasi N., Riahi Noori N., Sivash moakhar  R., “Investigation on the effect of fabrication parameters on mesoporous titanium oxide used as electron transport layer in Carbon-based perovskite solar cell”, 11^th biennial congress of the Iranian ceramic society & 2^nd international conference on ceramics”, Iran, Tehran, May 2017

Sedghi A., Zarabi golkhatmi S., Khalaj M., Saghafi yazdi M., “The effect of current collector on the electrochemical super capacitive behavior of graphene and graphene oxide electrodes”, 11^th biennial congress of the Iranian ceramic society & 2^nd international conference on ceramics”, Iran, Tehran, May 2017

2016

Fallah Arani H., Riahi Noori N., Sedghi A., Baghshahi S., Koohani H., “Effect of nano carbon additives on the graphitization of polyvinyl chloride”, 4^th conference on application of Nanotechnology on electrical power and energy industry, Iran, Tehran, Sep.2016

Fallah Arani H., Baghshahi S., Sedghi A., Riahi Noori N., “Enhancement of superconducting properties in the Bi-Pb-Sr-Ca-Cu-O System”, 31st power system conference, Iran, Tehran, Oct. 2016

Alipour M., Sedghi A., Baghshahi S., “Influence of Fe/Sr Molar Ratio on the Characteristics of Sr-hexaferrite Particles Synthesized by Sol–gel Combustion Method”, 6^th International Conference on Nanostructures (ICNS6), Iran, Kish Island, March 2016

Sedghi A., Aliakbar H., Gharleghi N., Kaviani B., “Structure and morphology of iron nanopowders fabricated by electrical explosion of wire and application of them in purification of waste waters”,  5^th international conference on materials engineering and metallurgy, Iran, Shiraz, Nov. 2016

Izadfar K., Sedghi A., “Synthesis of Mullite powder by gel combustion method”, 5^th international conference on materials engineering and metallurgy, Iran, Shiraz, Nov. 2016

Shahrdami L., Sedghi A., Shaeri M. H., “Fabrication and characterization of Al-matrix composites reinforced with carbon nanotube”, International Aluminum conference (IIAC 2016), Iran, Tehran, May 2016

2015

Fallah Arani H., Sedghi A., Riahi Noori N., Baghshahi S., “Effect of nano carbon additives on polyvinyl chloride used for Lithium Battery solar cell power storage”, 3^th conference on application of Nanotechnology on electrical power and energy industry, Iran, Tehran, Sep.2016

Fallah Arani H., Koohani H., Riahi Noori N., Sedghi A., “Effect of nano boron additive on the properties of BSCCO superconductors”, 3^th conference on application of Nanotechnology on electrical power and energy industry, Iran, Tehran, Sep.2015

Fallah Arani H., Koohani H., Riahi Noori N., Sedghi A., “Solid state synthesis of high temperature BSCCO superconductor”, 30^th power system conference, Iran, Tehran, Nov. 2015

Fallah Arani H., Koohani H., Riahi Noori N., Sedghi A., Baghshahi S., “Synthesis of high temperature BSCCO superconductor by partial melting method”, 30^th power system conference, Iran, Tehran, Nov. 2015

Sedghi A., “Recent development of carbon based materials in Iran”, 10^th congress of the Iranian ceramic society & the 1^st international conference on advanced ceramics, Iran, Tehran, May 2015

Poor Rahmani M., Sedghi A., Sarpolaki H., Golestani Fard F., “Study on fabrication of Cf/SiC composites by polymer inpergnation and pyrolysis (PIP) method”, 10^th congress of the Iranian ceramic society & the 1^st international conference on advanced ceramics,  Iran, Tehran, May 2015

2014

Sedghi A., Nourmohammadi miyankoshki H., “Effect of Carbon nanotubes on the function of dye sensitized solar cells”, 2^th conference on application of Nanotechnology on electrical power and energy industries, Iran, Tehran, May.2014

Sedghi A., Moradi Z., “characterization of nano MgAl₂O₄ spinel bodies synthesized from gel combustion method”, National conference of nanotechnology in science and technology, Iran, Malayer, May 2014

Sedghi A., Rahmani A., Moradi Z., “gel combustion, new method for synthesis of cordierite nanopowders”, National conference of nanotechnology in science and technology, Iran, Malayer, May 2014

Sedghi A., Dadashiyan S., Rahmani A., “Fabrication of Nano monoclinic Celsian (BaAl₂Si₂O₈) by solid state reaction”, 5^th international congress on nanoscience & nanotechnology (ICNN2014), Iran, Tehran, Oct. 2014

Sedghi A., Shakeri E., Janipour B., “Studying the effect of time and temperature on synthesizing nanometric MoSi₂ by Spark Plasma Sintering (SPS)”, 8^th congress & 3^rd international engineering materials & metallurgy conference, Iran, Tehran, Nov. 2014

Sedghi A., Rahmani A., Moradi Z., “Synthesis of cordierite nanopowder by gel combustion, using citric acid as fuel”, 8^th congress & 3^rd international engineering materials & metallurgy conference, Iran, Tehran, Nov. 2014

Sedghi A., Dadashiyan S., “Effect of CaO mineralizer on synthesis of Nano monoclinic Celsian”, 8^th Congress & 3^rd international engineering materials & metallurgy conference, Iran, Tehran, Nov. 2014

Esmailian M., Sedghi A., Khoshakhlagh  M., Ghariyanpoor M., “The effect of TiC and TiB₂refinersaddition on refining and continuous casting of 8006 and 8011 Al alloys”, 8^th congress & 3^rd international engineering materials & metallurgy conference, Iran, Tehran, Nov. 2014

2013

Jalilvand G., Sedghi A., “Synthesis of ZnO non-agglomerated nanopowders by Sedimentary method and applying urea”, 9^th congress of Iranian ceramic society, Iran, Tehran, May 2013

Sedghi A., Rodashti Sh., “Synthesis of mullite powder by gel combustion method with using silica fume and study the effect of processing parameters on its properties”, 9^th congress of Iranian ceramic society, Iran, Tehran,  May 2013

Sedghi A. Amini E., “Effect of fuel type on structure and properties of Barium hexaferrite (BaZn1.5Co0.5Fe16O27)”, 9^th congress of Iranian ceramic society, Iran, Tehran, May 2013

Sedghi A., Moradi Z., “Synthesis of nano mullite powder by gel combustion method with using rice husk ash”, 9^th congress of Iranian ceramic society, Iran, Tehran, May 2013

Sedghi A., Moradi Z., “Fabrication of nanostructured MgAl₂O₄ spinel bodies  by gel combustion method”, 9^th congress of Iranian ceramic society, Iran, Tehran,  May 2013

2012

Sedghi A. , Vahed R. ,Mashreghi A., Olia H., “Synthesis of Ti₂AlC and Ti₃AlC₂ MAX phases by Mechanically Activated Self propagating High temperature Synthesis”, The first international and the sixth joint conference of Iranian metallurgical engineering society and Iranian foundry men’s society, Tehran, Iran, Dec. 2012

Sedghi A., Hamidnezhad N., Riahi Noori N., “The Effect of Fluxes on Alumina Silicate Porcelain Insulator Properties and Structure”, International Conference on Ecological, Environmental and Biological Sciences (ICEEBS’2012),UAE, Dubai, Jan. 2012

Moghimi Ahouie F., Emamy M., Hajaghassi A., Baharmi A., Sedghi A., Pech-Canul M.I., “The Influence of Zn on the Tensile Properties of Extruded In-situ Al-15Mg₂Si-0.3Li (wt. %) Composite”, SAMPE 2012, USA, Baltimore, May 2012

Bahrami A., Moghimi Ahouie F., Emamy M., Soltani M., Hajaghassi A., Pech-Canul M.I., Sedghi A., “The Effect of T6 treatment on the Tensile Properties of Hot Extruded Al–15wt. %Mg2Si Metal Matrix Composite”,  SAMPE 2012, USA, Baltimore, May 2012

Sedghi A., Riahi Noori N., “Investigation on the effect of stoichiometric ratio and pressure ratio on fabrication of MoSi₂/Al₂O₃ composite by microwave assisted combustion method”, Iranian national conference on materials  engineering, Iran, Malayer, June 2012

Sedghi A., Azad Fallah M., Khatib Nejad H., Mir Hossaini S., “Fabrication of  MoSi₂-Al₂O₃ bodies and characterize their properties”, Iranian national conference on materials  engineering, Iran, Malayer, June 2012

Sedghi A., Poorbakhshi saied Saraiee M., Kaviani B., Zargaran I., “ Fabrication of AlN nanopowder by electrical explosion of Aluminum wire”, Iranian national conference on materials engineering, Iran, Malayer, June 2012

2011

Sedghi A., Nourmohammadi-Miankushki H., “Effect of drying condition and thickness of TiO2 electrode on photovoltaic performance of dye sensitized solar cell”, 3rd international conference ultrafine grained and nanostructured materials,  Nov. 2011, Tehran, Iran

Biglari S., Sedghi A., “Fabrication of Nano Silica Synthesized From Rice Husk / Epoxy Resin Nano Composites and Study of Their Mechanical properties”, PPS 2011- Asia/Australia Regional Meeting, Iran, Kish, Aug. 2011

Biglari S., Sedghi A., “Comparison of structure and properties of nano silica particles fabricated from rice hulls by Chemical and thermal methods”, Nanotechnology Conf., Iran, Kish, Nov. 2011

Torabi Parizi A., Ezatpour H. R., Sajjadi S. A., Sedghi A., “Fabrication and structure , properties of compocast with using inert gas of A356 aluminum alloy reinforced with nano-microsized Al₂O₃”, 2^nd conferences on applications of nanotechnology in sciences, engineering and medicine(NTC2011), Iran, Mashhad, May 2011

2010

Sedghi A. Riahi Noori N., “Synthesis of MoSi₂/Al₂O₃ composite by microwave assisted combustion method”, 4^th joint symposium of metallurgical engineering society and Iranian foundrymen’s society, Tehran, Iran, Oct. 2010

Sedghi A., Hamid-Nejad N., Riahi-Noori N., Babaie-Nejad B., “Effect of silica on structure and physical and electrical properties of electric porcelains”, 25^th international Power System conference, Iran, Tehran, Oct. 2010

Sedghi A., Biglari S., “Comparison of structure and properties of nano silica particles fabricated from rice husk by Chemical and thermal methods”, The 2nd International Conference on Composites Characterization, Fabrication and Application (CCFA-2), Kish- Iran, Dec.2010

Sedghi A., Golestani-Fard F., “Effect of Densification Parameters on the Structure and Properties of Two Dimensional Carbon- Carbon Composites”, 7th International Conference on High Temperature Ceramic Matrix Composites, (HT-CMC7) Germany, Bayreuth, Sep. 2010

2009

Sedghi A., Eslami-Farsani R., “Fabrication of carbon fiber from dry and wet spun textile PAN fibers”, First Asian Carbon conference, India, New Delhi, Nov. 2009

2008

Eslami Farsani R,  Shokouhfar A., Sedghi A., “Fourier transform infrared study on types of acrylic fibers for production of carbon fibers”, 2nd international conference and exhibition on composite materials and nano structures (IC2MS08), Malaysia, Melaka, Aug. 2008

2007

22.Sedghi A., Eslami-Farsani R., Shokouhfar A., “Fabrication of carbon fiber from PAN fibers, their properties and applications”, 6^th congress of Iranian ceramic society, Iran, Karaj,  May 2007

21.Sedghi A., Eslami-Farsani R., “Study of mechanical and physical properties of carbon fibers fabricated from commercial wet spin polyacrylonitrile fibers”, International conference on recent advances in composite material(ICRACM2007), India, New Delhi Feb.2007

2005

Sedghi A., Golestani-Fard F. “Effect of pyrolysis on the structural and properties of carbon – carbon composites”, SAMPE’05 conference, USA, Long Beach California, May 2005

Eslami-Farsani R., Shokouhfar A., Sedghi A., “Feasibility study for production of carbon, Basalt and glass fibers in Iran”, ICMAT 2005 Annual world forum on advanced materials, Singapore, Singapore , July 2005

Eslami Farsani R, Shokouhfar A., Sedghi A., “Fabrication of carbon fibers from chemical composition modified commercial PAN fibers”, 9th congress of Iranian metallurgical engineering society, Iran, Tehran, Oct. 2005

Sedghi A., Shokouhfar A., Eslami Farsani R., “The effect of processing parameters on the properties of carbon fibers fabricated from commercially dry spin acrylonitrile fiber precursors”, The Ninth Japan International SAMPE symposium, Japan, Tokyo, Nov. 2005

2004

Eslami Farsani R, Shokouhfar A. , Sedghi A., “Carbon fibers- polymer composite in human body”,  The European materials conference, , Poland, Warsaw Sep. 2004

Eslami Farsani R, Sedghi A., Shokouhfar A., “Extraction and recycling of Nobel metals with carbon fibers”, First conference of Iran minerals processing”, Iran, Tehran, Sep.2004

Eslami Farsani R, Shokouhfar A., Sedghi A., “New methods for application of carbon fibers in Iran and world petroleum industries”, 2^nd national conference for technology development in petroleum industry; challenges and approaches, Iran, Tehran, Jan.2004

2003

Sedghi A., Golestani-Fard F., “The effect of precursor content on the structure and properties of two dimensional carbon-carbon composites”, The 8th Japan International SAMPE symposium, Japan, Tokyo, Nov. 2003

Riahi-Noori N., Sedghi A., Momenzadeh Sh., “Fabrication of carbon fiber from commercial PAN fibers”, 7^th conference of Iran metallurgical engineering society, Iran, Tehran, Sep. 2003

Eslami A., Sedghi A., “Improvement of carbon fiber properties”, 2^nd conference of Iranian metallurgical engineering society, Iran, Tehran, Sep. 2003

 

1998

Plasseyed A., Saremi M., Sedghi A., “The relationship between microstructure and electrochemical behavior of mixed RuO₂-TiO₂ coating on titanium substrate for Cl₂ production”, 13th International power system conference (PSC98), Iran, Tehran, Nov. 1998

Eslami A., Sedghi A., “Characterization and improve properties of carbon fibers”, Proceeding of the second Iran metallurgical engineering society congress, Oct. 1998, Tehran, Iran

Nejdat M.,golestani-Fard F., Sedghi A., “Silicon carbide coating on carbon-carbon composites and study its properties”, 3^rd Iranian ceramic congress, Iran, Esfahan, May 1988

1995

Eslami Farsani R., Sedghi A.,  Akhlaghi F., “The effect of chemical treatment on the production of SiC whisker from rice husk”, 5^th world seminar on heat treatment & surface engineering (IFHT95), Iran, Isfahan, Sep. 1995,

Eslami Farsani R., Sedghi A., Akhlaghi F., “The effect of fabrication parameters on the production of SiC whisker from pyrolysis of rice husk”, proceeding of the Second ceramic congress, Nov. 1995, Tehran, Iran

1994

Eslami Farsani R., Sedghi A., Akhlaghi F. “The effect of chemical treatment (acid and basic) on the structure of rice husk and SiC whisker from it”, The first national chemical engineering congress, Iran, Tehran, Nov. 1994

Kaviyani Nejad F., Sedghi A., “Fabrication of carbon fiber-Phenolic composites”, The first national chemical engineering congress, Iran, Tehran, Nov. 1994

Jalilian F., Sedghi A., Djahazi M., “The effect of surface treatment on the growth of copper on the carbon fiber surfaces”, Proceeding of the second annual congress on mechanical engineering, May 1994, Tehran, Iran

1993

Jalilian F., Sedghi A., Djahazi M., “The effect of surface treatment on the adhesive properties of carbon fiber surfaces”, Proceeding of the first seminar on Tribology & surface engineering, Iran Isfahan, May 1993,

1985

Saremi M., Sedghi A., “Separation of Heavy metals from industrial waste waters”, Second seminar on industrial waste waters, Iran, Tehran, Sep. 1985

 

Published Books:

Mechanical properties of materials, 3rd edition, Imam Khomeini International University (2005, 2012, 2015)

Shape memory materials, 1^st edition, Arena Pub., 2013